Two Fussy Blokes Mohair Hybrid Mini 100mm Paint Rollers 5mm Nap/10 Packs
Achieve a smooth finish without a spray gun, these 5mm rollers allow painters to paint with oil-based paints and industrial coatings.
Using oil based paints or industrial coatings is now easier than ever without the need of crazy equipment except for a 10 pack of these strong little guys. Our Mohair Hybrid mini paint rollers aren’t here for the small jokes but truly pack a punch when it comes to picking up and releasing paint. Worry no more about the little nooks and crannies, when you can get great coverage and a smooth finish with our mini rollers that even the fussiest of painters fall in love with. If you’re not sure about getting such a big pack or only want a few on hand for your next job, check out our single and 3-pack options to get you rolling sooner rather than later.
SMOOTH FINISH ROLLER FOR OIL BASED PAINTS
Our Mini Mohair Hybrid NAP/Pile rollers are designed to provide you with the smoothest finish possible with oil-based paints. And did we mention it’s perfect for oil-based paints? When starting a new project remember that the type of painting job determines the NAP/Pile you will need – for a finer finish stick to shorter NAPS. This will allow you to transform your home and upcycle while saving your money and the earth. And why not achieve a great finish while you’re at it? Europe’s most prestigious painters use our 5mm mini rollers. The 5mm Mohair Hybrid holds just enough paint to make your project a breeze and has been developed to prevent splattering.
Perfect for oil-based paints
PRODUCT SPECIFICATIONS
- Perfect for oil-based paints. Recommended for primers and topcoats.
- Ideal for doors, trims, cupboards, furniture, and smooth surfaces.
- Spray-like finish, excellent paint pick up and release, no need to lay off, excellent coverage.
- NAP/Pile: 5mm | 1/4″
- Sizes: 100mm | 4″
- Packs: 3-Packs and 10-Packs
Our Recommendation
The key to achieving the smoothest finish is to make sure that the painted surface is prepared well – holes filled, surface well cleaned, and dried. Also, before starting using our rollers, always use water to “rinse & spin before you begin” and you will achieve the best finish right from the start. Besides, the post-painting cleaning process will be much easier too!
Wash them well after each use, and keep them moist. If you let the fabric dry, you run the risk of fibres drying hard.
Our rollers don’t shed unless a manufacturing fault has occurred. If this happens, you’ll see chunks of fabric coming off rather than single strings of fabric. We recommend the ‘rinse and spin before you begin’ tactic to get rid of all loose fibers on your roller.
We do not recommend using our current range of rollers with shellac paint. Shellac will gradually dissolve glue, causing damage to the roller and resulting in shedding during paint application
Dacron sleeves are different to Wooster Pro/Doo-Z fabric. Dacron is to be used for only water-based paints, whereas Wooster Pro/Doo-Z can be used with all paints.
In general, microfibre rollers are finishing rollers. They’re recommended for use with water-based paints; however, you can use them with some primers.
Because of the structure of the fabric, our 10mm Dacron rollers perform best with acrylic paints and are not suitable for oil-based paints.
If you’re priming your brand-new plasterboard walls or repainting either darker or lighter, our Dacron is the best pick to achieve optimal coverage and a professional-looking finish. Learn more about Dacron vs. microfibre here.
Our Dacron paint roller sleeve will give you superb coverage while our Microfibre paint roller sleeve will leave a smooth finish.
It’s all about the substrate and the condition of the surface. Generally, the higher the nap, the more ‘orange-peel effect’ is visible if you paint over a flat surface.
The most common naps are 5mm (smooth surfaces), 10mm (the most common nap; best for semi-smooth surfaces), and 15mm+ (textured or rough surfaces).
Our 5mm-nap microfibre rollers are best for smooth surfaces where a seamless finish is desired — such as flat walls, doors, and large cupboards.
10mm naps are best for top coats or large paint projects where more coverage and smooth finishes are required. Our roller-sleeve fabric is designed to leave a smooth, uniform finish on painted surfaces.
We recommend our Dacron roller for acrylic primers to enhance the finish of the microfibre.
Use a 15mm nap when you don’t require a smooth finish and when time is of the essence. Our 15mm-nap microfibre roller is ideal for these scenarios; it holds more paint than the 10mm (allowing you to complete your project more quickly) and still leaves a smooth finish.
No. We don’t currently have an epoxy roller in our range.
We’re working on it! We’ll soon be releasing rollers suitable for epoxy.
Our rollers can be used with water-based varnishes, but we recommend testing yours with any oil-based varnish before use.
In general, we recommend using our microfibre rollers with water-based paints only for best results. However, you can use some oil-based paints as well; we recommend testing before use.
Dacron can only be used with water-based paints. This type of fabric is not designed to work with any solvent-based paints.
If you use a water-based system, we recommend Dacron rollers for priming. Use our 5mm or 10mm microfibre on the top coat for best results.
Most synthetic fibres weaken when exposed to chemicals, so unfortunately our microfibre rollers are affected by prolonged exposure. We know that painters use our rollers with Brush Mate, and although it works for the short-term, we don’t recommend the practice.
We personally have never used our microfibre rollers with chalk paints, but we’re aware of customers successfully doing so. Thousands of our followers are upcyclers who use our rollers with chalk paint on a daily basis. We also supply retail and online stores that specialise in chalk paint.
We haven’t personally tried it, nor do we know of customers doing so. Chalk paint is generally applied with a mini roller, and we don’t currently have a mini version of the Dacron. At this point, we wouldn’t recommend using our Dacron rollers with chalk paints.
Two Fussy Blokes paint-roller sleeves come in different lengths, fabrics, naps/piles, and cores.
LENGTHS: 4” | 100mm, 9” | 230mm, 11” | 270mm, 11” | 305mm, 12” | 360mm, 14”
FABRICS: Microfibre and Dacron
NAPS/PILES: 5mm | 1/4”, 10mm | 3/8″, 15mm | 19/32”
CORES: 6mm, 38mm, and 44mm
COMING SOON
2” | 50mm microfibre in 5mm | 1/4” nap/pile
We currently only offer mini-roller frames, but work is underway to release frames for our larger products.
Our products are made in China, but don’t panic! We have a rigorous quality assurance plan in place that includes inspections at each step of the manufacturing process.
It took us two years to find a factory capable of producing products that meet our incredibly high standards. We’re clear about our expectations from the beginning and before placing an order. We also visit our factory regularly and work with the QC team to ensure every product meets a detailed quality checklist.